Best Sale

Millimeter Wave Connector

Millimeter Wave Connector

In order to meet the requirements of the latest generation of communication equipment, millimeter wave connectors have been designed with extremely high speed data transmission and very low loss characteristics.

More
Low PIM Connector

Low PIM Connector

Low return loss and low IMD connectors to meet the higher frequency requirements of today's market!

More

BNC Plug Taper grip

SB-109

Specification

Electrical
Impedance50ohm75ohm
Frequency Range0-4 GHz0-1 GHz
Working Voltage500 VRMS max.500 VRMS max.
Dielectric Withstanding Voltage1500 VRMS min1500 VRMS min
VSWRStraight1.3 max1.3 max
Right Angle1.5 max1.5 max
Contact ResistanceCenter Contact3 Milliohms Max3 Milliohms Max.
Outer Contact2 Milliohms Max2 Milliohms Max.
Insulator Resistance5000 Megohms min.5000 Megohms min.
Material
Parts NameMaterialFinish
Body, Metal PartsBrass per QQ-B-626Nickel plated
Center ContactsPlug: Brass per QQ-B-626Gold or Silver per requirement
 Jack: Beryllium copper per QQ-C-530 or Phosphor Bronze per QQ-B-750 or Brass per QQ-B-626Gold or Silver per requirement
InsulatorsTeflon, Delrin, PBT polyesterNone
Crimp FerrulesAnnealed copperNickel or Silver per requirement
Clamp GasketsSilicone rubber, Synthetic rubberNone

NOTE : Other Material/Finish is Available on Request.

Mechanical & Environmental
Engagement Force2.5 in-lbs. max. torque
Disengagement Force3 lbs. max. axial force
Coupling Nut Retention100 lbs. min.
Contact Retention6 lbs. min.
Durability (Mating)500 cycles min.(for Beryllium copper Jack contact only)
Temperature Range-65℃ to 165℃
VibrationMIL-STD-202 Method 204 Test Cond.B.
Salt SprayMIL-STD-202 Method 101 Test Cond.B.
Thermal ShockMIL-STD-202 Method 107 Test Cond.B.
Cable Assembly Instructions-Wedge Compression
cable instructions-crimp
STEP 1.All parts of the connector are shown.
STEP 2.Strip the cable inner conductor, dielectric, braid, and jacket as per
"RECOMMENDED CABLE STRIPPING DIM'S" in catalog
STEP 3.Slide the HEX NUT onto cable, then insert the CONTACT ASSEMBLY under braid and jacket.
STEP 4.Insert cable and parts into the MAIN BODY, then screw the HEX NUT until it is tight.
  • Tag
  • BNC Connector