BNC plug crimp connector is combined with body, ferrule, and pin. After cable is stripped to the recommanded dimensions, solder the pin onto cable, insert cable into body, and crimp ferrule at the bottom body. Special hand tool is needed for installing. Please feel free to consult us for hand tools.
BNC plug clamp connector is to combine with cable by means of screwing. After cable is stripped to the recommanded dimensions, solder the pin onto cable, place all the parts in the body, and screw the hex nut onto body till tight. Hand tool is not needed for this connector.
BNC plug twist-on connector is the most easy way for combining cable. After cable is stripped to recommanded dimensions, insert and twist cable into connector and it is done.
BNC plug compression connector is designed to combine cable by means of compressing. Cable secifications are most RG58, RG59, RG6U, and RG6U quad. Special hand tool is needed for this installation.
BNC straight jack connector is with a metal bracket for mounting onto PCB. This connector is designed with a switch device, so the transmission can be turned on and off while mating or unmating the connector.
Dual BNC jack is designed with one BNC on top and the other BNC on bottom. Two BNCs are combined with a black plastic housing. Therefore, this way saves time and spacing while mounting onto PCB. Also, plastic housing is able to isolate metal interferance. This BNC model supports 3G-SDI application.
BNC jack panel mount connector is used most for module device, such as capture card. BNC jack is usually with two mounting post, center pin, and grounding pin, and is easy to install on the device case.
This BNC jack is designed for mounting onto PCB. Besides, the connector body is with a dot and a hole for mounting panel. A M2 screw is attached for fixation.
The 4 BNC jacks in 2 rows is designed to save spacing in the restricted area. Within the same width, the BNC ports can be double arrayed in 2 lines.
This is the most common BNC jack to BNC jack adapter.
This is the most common BNC double jack bulkhead adapter. The bulkhead and threads can be made either metal or plastic. The design of plastic bulkhead and threads has isolating function.
The BNC to RCA adapter connectors are designed for meeting the need of transmitting signal inbetween BNC and RCA connector interface, which can be designed either male or female to meet proper mating.
The function of BNC T type adapter is to make the original one jack to two jack for mating purpose.
BNC plug terminator is with function of terminating the signal transmitting. 50ohm and 75ohm applications are available for choices.